Description
Finally! A Blood Glucose Monitor That's Accurate, Easy to Use, and Has a Lifetime Warranty
ATOM AT-600 Blood Glucose Monitor, The Most Accurate and Innovative Glucometer on the Market. Diabetics, rejoice! There’s finally a blood glucose monitor that’s accurate, easy to use, and has a lifetime warranty. This is the most innovative glucometer on the market, and it’s changing the way people manage their diabetes.
With the ATOM AT-600 glucometer, you can get accurate results in just 5 seconds, with only a tiny blood sample required. The large LCD with backlight makes it easy to read your results, even in low light conditions. And the strip-ejection function helps to avoid blood contagion.
Plus, the Atom AT-600 comes with a lifetime warranty, so you can be sure that it’s an investment that will last.
If you’re looking for the most accurate and innovative blood glucose monitor on the market, Order your ATOM Blood Glucose Monitor today and experience the difference!
Glucometer Price in Pakistan: The Cheapest Glucometers in Pakistan
INSTRUCTIONS TO FOLLOW BEFORE TH USE OF GLUCOMETER
- Severe dehydration and excessive water loss may cause readings which are lower than actual values. If you believe you are suffering from severe dehydration, consult a healthcare professional immediately.
- If your blood glucose results are lower or higher than usual, and you do not have any symptoms of illness, first repeat the test. If you have symptoms or continue to get results which are higher or lower than usual, follow the treatment advice of your healthcare professional.
- Use only fresh whole blood samples to test your blood glucose. Using other substances will lead to incorrect results.
- If you are experiencing symptoms that are inconsistent with your blood glucose test results and you have followed all the instructions given in this owner’s manual, contact your healthcare professional.
- We do not recommend using this product on severely hypotensive individuals or patients in shock. Please consult the healthcare professional before use.
- The measurement unit used for indicating the concentration of blood or plasma glucose can either have a weight dimension (mg/ dL) or a molarity (mmol / L) . The approximate calculation rule for conversion of mg / d * L in mmol / L is:
HOW TO USE THE ATOM GLUCOMETER?
To perform a blood glucose test on Atom Glucometer, you have to follow the steps given below:
Total Time Needed: 5 minutes
Total Cost: 30 Rupees
Required Tools:
- Lancing Device
- Lancets
- Spirit swabs
Things Needed?
- Atom Glucometer
- Atom Strips
Follow the steps carefully to perform a blood glucose test.
Step 1 : Wash your hands
Wash and dry your hands before starting.
Step 2 : Prepare the Lancing Device
Prepare the lancing device by inserting the lancet in the lancing device by following the procedure shown in the figure.
Step 3 : Insert the Test strip to turn on the meter
After inserting the strip, wait for the meter to display blood drop sign
Step 4 : Obtaining the blood sample
Use the pre-set lancing device to puncture the desired site. Wipe off the first appeared drop of blood with a clean cotton swab. The size of the drop should be at least as big as (actual size), which is 0.5 microliter (µL) of volume. Gently squeeze the punctured area to obtain another drop of blood. Be careful NOT to smear the blood sample.
Step 5: Apply the sample
Gently apply the drop of blood to the absorbent hole of the test strip at a tilted angle. Confirmation window should be completely filled if enough blood sample has been applied. Do NOT remove your finger until you hear a beep sound.
Step 6: Read the Result
The result of your blood glucose test will appear after the meter counts down to 0. The blood glucose result will be stored in the memory automatically.
Step 7: Eject the used Test Strip
Eject the test strip by pushing the eject button on the side. Use a sharp bin to dispose of used test strips. The meter will switch itself off automatically.
SPECIFCATIONS OF ATOM AT-600 BLOOD GLUCOSE MONITOR
| Properties | Details |
|---|---|
| Model: | AT-600 |
| Dimension & Weight: | 96 (L) x 61 (W) x 26 (H) mm, 672g |
| Power Source: | Two 1.5V AAA alkaline batteries |
| Display: | LCD |
| Power Requirements: | Battery: Two AAA-size 1.5V Batteries Power Consumption: Less than 40mA |
| Memory: | 1000 measurement results with respective date and time |
| External Output: | USB Cable Auto electrode insertion detection Auto sample loading detection Auto reaction time count-down Auto switch-off after 3 minutes without action Temperature Warning |
| Operating Condition: | 10C to 40C (50F to 104F), below 85% R.H. (non-condensing) |
| Meter Storage / Transportation Conditions: | MINUS 20C to 60C - 4 deg * F to 140F), below 95% R.H. |
| trip Storage / Transportation Conditions: | 2C to 30C 35.6 deg * F to 86F), below 85% R.H. |
| Measurement Units: | either mg / d * L or mmol/L |
| Measurement Range: | 20 to 600mg / d * L (1.1 to 33.3mmol / L ) |
Reviews
There are no reviews yet.